Bed side panels
Moderator: FORDification
-
M-100
- New Member
- Posts: 168
- Joined: Fri Nov 28, 2008 7:35 pm
Bed side panels
Been looking around for bed side panels to repair rust . Does anybody make these
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Bed side panels
Page 23"M-100"]Been looking around for bed side panels to repair rust . Does anybody make these
http://www.lmctruck.com/icatalog/fb/full.aspx?Page=23
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
M-100
- New Member
- Posts: 168
- Joined: Fri Nov 28, 2008 7:35 pm
Re: Bed side panels
For comparison what would be a reasonable price for a good bed
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Bed side panels
Probably better answered on where you live as i find rust free bumps here for less than $1K all day long, (I'd buy every last one of them if i won the lottery tomorrow LOL)!"M-100"]For comparison what would be a reasonable price for a good bed
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
jzjames
- 100% FORDified!
- Posts: 1780
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: Bed side panels
$350.M-100 wrote:For comparison what would be a reasonable price for a good bed
-
cstoyer
- New Member
- Posts: 201
- Joined: Wed Jul 08, 2015 9:32 am
- Location: NW PA
Re: Bed side panels
In Pennsylvania you will pay $600. That’s is for a bed trucked in from the West or South. Few places around here do that.
Cstoyer
Cstoyer
68 F250 4x4