68-72 f250 hubcaps

ezernut9mm · Post by **ezernut9mm** » Sat May 12, 2012 10:16 pm

i have a set of real nice stainless f250 hubcaps for sale. not perfect, but real nice daily driver condition. 100$ shipped in the lower 48. i wish i would have found these when i had my 67. i might not have sold it.

they are that nice.

colnago · Post by **colnago** » Mon May 14, 2012 1:10 am

What size rim will these fit? Or maybe a better question is, what is the inner diameter of the covers?

Thanks,

Joseph

ezernut9mm · Post by **ezernut9mm** » Mon May 14, 2012 9:09 am

12" diameter. should fit 16's and 16.5's factory style wheels. accuride etc.

ezernut9mm · Post by **ezernut9mm** » Wed May 16, 2012 12:07 am

these are as nice as they come. i'm sure an f250 owner really needs theses. i wish i still had mine to put them on.

Calfdemon · Post by **Calfdemon** » Thu May 17, 2012 3:24 pm

Im playing cupid right now... You have a new member looking for some: http://www.fordification.com/forum/view ... 13&t=66070

ezernut9mm · Post by **ezernut9mm** » Thu May 17, 2012 9:14 pm

thanks rich.

abyars111 · Post by **abyars111** » Fri May 18, 2012 4:48 pm

I'll take them. PM sent.

1971ford · Post by **1971ford** » Fri May 18, 2012 8:41 pm

Dang, those would be badass on the highboy on the upcoming beadlocked 16.5's

snake · Post by **snake** » Sat May 19, 2012 1:01 pm

Just curious as to why you listed these as '68-72' and not '67-72'??? They look just like what's on my '67 (and I assumed were original since the truck is very original) - or is there some subtle difference that I need to pay closer attention???

ezernut9mm · Post by **ezernut9mm** » Sat May 19, 2012 7:42 pm

i thought the 67 f250 caps had an inside mounting ring as opposed to mounting over the ring on the wheel.
the 67 rims and caps. notice the ring on the hubcap is inset and mounts to an "innie" wheel:

the 68 and up wheels and hubcaps mount over the ring on the wheel:

snake · Post by **snake** » Sat May 19, 2012 7:55 pm

Maybe mine have been changed over the years to the newer style????

ezernut9mm · Post by **ezernut9mm** » Sat May 19, 2012 8:20 pm

this is where i'm not sure. i know that the "innie" style that came on my 67 were original. they were offered in 66 and 67 only. i do not know however, when the change over came for the "outies" and if they were offered on other wheel sizes. maybe hawkrod will chime in here.

ezernut9mm · Post by **ezernut9mm** » Mon May 21, 2012 9:11 pm

sold!

Dr Casti · Post by **Dr Casti** » Thu May 31, 2012 3:51 pm

Where can I get those 8-lug standard wheels for my 69´F-250?

ezernut9mm · Post by **ezernut9mm** » Thu May 31, 2012 11:17 pm

Dr Casti wrote:Where can I get those 8-lug standard wheels for my 69´F-250?

the junk yard. the upullit around here charges like 8 bucks for a steel wheel. look for "accuride" and a date code like this "e3" or "f3" and they should fit. the 250 trucks changed lug pattern in the late nineties, but the vans stayed the same until the 2k some time. i would just look for wheels marked for the 90's (f) and you should be good.

The FORDification.com Forums

68-72 f250 hubcaps

68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps

Re: 68-72 f250 hubcaps