1975 body
Moderators: FORDification, Doug Comer
-
- New Member
- Posts: 30
- Joined: Sat Jan 31, 2009 12:09 am
1975 body
will a 75 2wd f 250 body go on my 72 f250 4x4 without to much trouble? Rolled my 72 and have a chance to get a clean 75. Has anyone done this? Need help on this. Thanks PTO DAVE.
- averagef250
- 100% FORDified!
- Posts: 4387
- Joined: Fri Mar 17, 2006 12:58 am
- Location: Oregon, Beavercreek
Re: 1975 body
The cab and front sheetmetal will bolt onto the frame, but the bed will be a challenge. The bump wheelbase is shorter by several inches.
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70
-
- Preferred User
- Posts: 285
- Joined: Thu Jan 27, 2011 2:09 am
- Location: Victoria B.C. Canada
Re: 1975 body
The bump wheelbasee is 2" shorter (75 body is a bit to long) The rear frame rails are also 3" wider, so the bolt hoes can't line up. What about looking for another bump body. Whether you like it or not, now is the time to do the full meal deal to your truck! Get another body, paint it and put it on. That is if you can have it of the road that long. And find the right deals.averagef250 wrote:The cab and front sheetmetal will bolt onto the frame, but the bed will be a challenge. The bump wheelbase is shorter by several inches.
1970 ranger 4x4
1965 mustang needs resto
flh shovelhead
rigid evo
1965 mustang needs resto
flh shovelhead
rigid evo
-
- New Member
- Posts: 30
- Joined: Sat Jan 31, 2009 12:09 am
Re: 1975 body
Thanks for the help.