Bed floor repair

[nealro]

I bought 20"x48" panels from Summit Racing that are labeled Triplus Co and Key Parts Inc, made in Taiwan. Listed on summit's site as Goodmark.
...They don't match worth a darn. The angle on the ribs is not steep enough and just don't match up quite right. so if you lay the panel in the bed and sort of match up a couple ribs in the center, they are off by a good half inch at the outer ribs. At a glance they appear pretty useless if you are trying to replace a large section.

I mentioned in a previous post that I had ordered the panels from Sherman Parts, but when I looked again these Goodmark / Key Parts / TriPlus panels are what I bought.