PXL_20230201_141319505~3 by rumblin46, on Flickr
PXL_20230201_141344065~2 by rumblin46, on FlickrChebby part (airdam)
Moderator: FORDification
-
rumblin46
- New Member
- Posts: 80
- Joined: Sat Oct 05, 2013 6:29 pm
- Location: Tampa, FL
Chebby part (airdam)
88-98 front airdam. For those interesting in such things.
PXL_20230201_141319505~3 by rumblin46, on Flickr
PXL_20230201_141344065~2 by rumblin46, on Flickr
PXL_20230201_141319505~3 by rumblin46, on FlickrPXL_20230201_141344065~2 by rumblin46, on Flickr69 F100 - Coyote - Gen II Flavor
-
cep62
- 100% FORDified!
- Posts: 2068
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: Chebby part (airdam)
Looks good.
Is that bolted to the bumper ?
Is that bolted to the bumper ?
-
rumblin46
- New Member
- Posts: 80
- Joined: Sat Oct 05, 2013 6:29 pm
- Location: Tampa, FL
Re: Chebby part (airdam)
Not currently. I welded up a "frame" that bolts to the truck frame with 2 wings that bolt up to the core support. The center of the dam frame and dam sandwich the bumper. I fo think I need extra support in the center so likely need to bolt to the bumper...
69 F100 - Coyote - Gen II Flavor
-
Ripridesbikes
- New Member
- Posts: 1
- Joined: Wed Mar 08, 2023 2:05 pm
Re: Chebby part (airdam)
OOOOOOh man I dig that! Not only does it look sweet but that is most likely functional as well. Cutting down on air flow under the truck might give you some extra MPG on the freeway win-win!