First time purchasing repair/ Patch panels. I rather spend the money once on good ones.
I was looking at Dennis Carpenter's and LMC.
unless somewhere better is available.
Thanks
Rodney
Best quality Patch Panels/Floor Pans. Etc
Moderator: FORDification
-
rbmead
- New Member
- Posts: 27
- Joined: Mon Oct 01, 2012 10:07 pm
- Location: Powder Springs, GA
Best quality Patch Panels/Floor Pans. Etc
Last edited by rbmead on Mon Nov 21, 2016 9:19 pm, edited 1 time in total.
1972 Ford F100 SWB 4x4
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Best quality Patch Panels/Floor Pans. Etc
Consider TabCo.
... but even the best panels are dependent on the skill of the lucky guy who gets to install it.
... but even the best panels are dependent on the skill of the lucky guy who gets to install it.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
-
jzjames
- 100% FORDified!
- Posts: 1780
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: Best quality Patch Panels/Floor Pans. Etc
I have bought Keyparts (for my Jeep) and they were spot on. I recommend;
http://www.keypartsonline.com/1967-1972-1/
http://www.keypartsonline.com/1967-1972-1/
-
lilorbie
- New Member
- Posts: 44
- Joined: Sun Jan 31, 2016 7:29 pm
Re: Best quality Patch Panels/Floor Pans. Etc
imo stay away form LMC.