Drip rail trim

Moderator: FORDification

Post Reply
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Drip rail trim

Post by Ron_Hall »

Hi everybody.. Does anyone know how I remove these chrome trim pieces?

Thanks
Ron
You do not have the required permissions to view the files attached to this post.
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
User avatar
TNIceWolf
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 864
Joined: Sat Jan 03, 2009 9:52 am
Location: Tennessee Greeneville

Re: Drip rail trim

Post by TNIceWolf »

Old school bottle opener. Apparently it peels off like a beer cap. All of the trim I purchased from members here that you pictured was removed and sent to me that way. Seems to be the way to go if you go slow and use care and thought.
Find 'em....Buy 'em....Fix 'em.....Drive 'em....Love 'em

HHC 4/67AR.... Bandits.....88-92

Presently in the stable
1969 Ford F-350 DRW
1989 Chevy S-10 Tahoe ( It gets me to work and back and fetches parts and groceries)
1981 Buick Regal ( My deceased uncles last project/driver....renamed project Regal Eagle to be finished in his honor)
1990 Ford F-150 ( Miss Yvonnes Daily Driver )
My F-350 project http://www.fordification.com/forum/view ... 22&t=41744
User avatar
FORDification
Site & Forum Admin
Site & Forum Admin
Posts: 8050
Joined: Sun Jul 11, 2004 12:52 am
Location: Kansas, Wellsville
Contact:

Re: Drip rail trim

Post by FORDification »

:yt: Just wrap the ends of the bottle opener with some tape to prevent scratching the trim. And of course, use the flat end of the bottle opener, not the pointy end. Just take your time and slowly work it off.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
ImageImageImage
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: Drip rail trim

Post by Ron_Hall »

Thanks guys, it WORKS!!!
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
User avatar
tnab1970
New Member
New Member
Posts: 181
Joined: Mon Apr 22, 2013 12:48 pm
Location: Cleburne, Texas

Re: Drip rail trim

Post by tnab1970 »

can also remove with two pinch bars very easily when found at wrecking yard. First one upside down on the glass, second used correctly just under the edge of the trim. If this trim is not on your "wrecking yard grab" list it should be. It can be very difficult to locate.
Post Reply