I'm going to make an offer soon on a new cab. As much as I hate to scrap mine, it's beyond what I'm capable of repairing.
My truck has a 4 speed and the cab I'm looking at has an auto trans, I know I can cut the hump out for the gear shift, but is it any problem to
mount the clutch pedal and linkage in the new cab? Thanks for any advice.
cab swap transmission question
Moderator: FORDification
-
madtom
- New Member
- Posts: 72
- Joined: Sat Aug 29, 2015 11:14 am
- Location: Wyandotte, OK
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: cab swap transmission question
No problem at all. The whole pedal assembly just bolts in. Might have to cut a hole in the floor for the clutch linkage. If you have the removable high hump cover in your old truck, you probably will have to swap that in too.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
71cc
- New Member
- Posts: 114
- Joined: Thu Apr 09, 2009 4:26 pm
Re: cab swap transmission question
There is a cover plate in floor for clutch linkage. Remove two screws and put boot in.