proportioning valve bracket
Moderator: FORDification
-
customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
proportioning valve bracket
made a proportioning valve bracket today. it bolts to the hydroboost and mounts under it. heres acouple of pics. one of the bracket and one mounted in the truck.
You do not have the required permissions to view the files attached to this post.
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
-
69bumptruck
- Preferred User
- Posts: 269
- Joined: Tue Jan 30, 2007 10:02 pm
- Location: Moore, Oklahoma
- Contact:
re: proportioning valve bracket
Showoff. 
Just joking. That's some nice work. Very clean.
BTW, that's one sick looking truck! (In a good way)
Just joking. That's some nice work. Very clean.
BTW, that's one sick looking truck! (In a good way)
-
FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: proportioning valve bracket
I agree! That's a very slick-looking setup. Nice job! 
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: proportioning valve bracket
i like it 
. dang they want 1.40 a piece for stainless 3/8 1 1/2 bolts. they look nice but i am starting to be shock on how much evething is marked up. i guess i can start routing my lines then maybe i can mark off the brake system off my list
. dang they want 1.40 a piece for stainless 3/8 1 1/2 bolts. they look nice but i am starting to be shock on how much evething is marked up. i guess i can start routing my lines then maybe i can mark off the brake system off my list You do not have the required permissions to view the files attached to this post.
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners