my project update..

hiboy72 · Post by **hiboy72** » Mon Apr 09, 2007 10:50 pm

well guys since all you are a photo-maniacs,(including myself) here are some pic's from my project

http://www.picturetrail.com/gallery/vie ... E1yyNEjdEc&

Heavenlyfire · Post by **Heavenlyfire** » Mon Apr 09, 2007 11:58 pm

Nice

, looks like mine right now, no nose

.

rjewkes · Post by **rjewkes** » Tue Apr 10, 2007 2:16 am

In the photo with the studs welded to the cab is that the spitznickel(SP?) Method of dent removal?

hiboy72 · Post by **hiboy72** » Tue Apr 10, 2007 5:22 am

I never hear that word (spitznickel),but yes i use a electric stud welder gun.
were you first grind the damage area to bare metal. Insert stud welding tip.Insert stud and press gun against damage panel until ring touches.
Keep a firm contact between the gun and the bare metal.
then press the trigger for one half to one second,once I weld the stud,
I slip the puller slidehammer over welded stud and steady pull on handle
and tapping damaged area, this method will remove most dents.
to remove studs,snip cutters and grind off the remaining head.I love it !
http://cgi.ebay.com/ebaymotors/H-S-5500 ... enameZWDVW

hiboy72 · Post by **hiboy72** » Tue Apr 10, 2007 5:28 am

a few more accessories for the same spotter gun....
http://www.crestnetsales.com/uni-spotter.htm

rjewkes · Post by **rjewkes** » Tue Apr 10, 2007 9:01 pm

Cool, i had a friend call that spitznickel again i'm not 100% on spelling.

Sounds better than the old fashioned beat it smoother/flatter then pull it 75-90% out and fill with bondo(bondo ooooj Yuck!).

The FORDification.com Forums

my project update..

my project update..

re: my project update..

re: my project update..

re: my project update..